Fleeced Veneer

- Edgings -

Home | Find the nearest distributor | Contact CV | Feedback |

Fleeced Veneer is a continuous roll natural timber veneer edging strengthened with cellulose backing paper (fleece) and face-sanded to an even thickness.
	Fleeced Veneer is manufactured by Consolidated Veneers in its Sydney factory and is used throughout the world for standard edging applications, softforming and profile wrapping. Click here for a full list of species available

Why Fleeced Veneer ?

Continuous rolls
Optimises edgebanding speed while minimising the offcuts and wastage experienced with veneer strips.

Staggered finger joints
Finger joints mean extra strength and they are almost completely undetectable.

Fleece backed
Strong cellulose backing eliminates splintering, splitting, cracking and breakage during edgebanding and no priming is required.

Face sanded
The veneer is ready for lacquering after edgebanding.

Application

Fleeced Veneer can be applied by

    hotmelt edgebanders,
    hot-air edgebanders, or
    manually with a contact adhesive.

Most edgebanders’ trimming devices will cut Fleeced Veneer cleanly and without difficulty.

Fleeced Veneer can also be trimmed with a standard router.

Please note:
Fleeced Veneer can vary in colour from batch to batch because it is a natural timber product.

Fleeced veneer during sanding process

Standard sizes

Width: 22mm, 30mm and 40mm
Length: unglued 100m / preglued 50 and 100m
Thickness: 0.45 - 0.65mm
(There may be some variation in thickness by specie)

For non-standard widths a minimum order requirement of 300m applies.

[ Veneer ] [ DIY veneer ] [ Contracting ]
[ Veneer species ]